Surgical Steel 4mm Flat Pad Post Earrings with Peg & Clear Rubber Ear Nuts, 40/Pkg will not tarnish and can be worn by most people.
If the peg is too long and will protrude through the front of the bead, trim the peg back with flush cutters.
- Bake or cure the earring front (the piece that will have the stud mounted on the back).
- Par drill a hole using a tiny drill bit into the back of the piece for the peg to go into.
- Use a tiny amount of Loctite Gel Control on the peg and flat pad. Working quickly, insert the peg into the par drilled hole.
- Leave to dry,
- A further security measure is recommended – cover the flat pad with a thin circle of clay and bake / cure again.