MOIKO Silk Screen – 11.15

Each Moiko Silk Screen is A7 size measuring 85mm x 125mm (3 1/4 x 5 inches).  The Moiko Silk Screen range is just perfect for printing on polymer clay.  They have been prepared especially with hobbyists and craft workers in mind.  All you need is a block of polymer clay, acrylic paint, an old credit card and a Moiko Silk Screen and you are ready to create something unique!

Silk Screening on polymer clay is great fun, quick, easy and you are assured of great results.

Each pack contains one silk screen with basic instructions.

Important Tips for Using a Moiko Silk Screen:

• Use well conditioned clay.  The thickness of the clay is up to the user to decide and depends on the project.
• Lightly adhere your clay to a tile or surface so that it is not going to move around.
• You can polish your clay very lightly with the flat of your hand.  This gives a nice sheen to the clay.  Not necessary but worth trying!
• Lightly burnish the screen onto the clay with the flat part of your fingers or roller to ensure it has sealed the blank parts of the design onto the clay. This is so the paint does not seep into these areas.
• Put a line of acrylic paint along the top of the screen and drag down lightly with the credit card.  Add more paint if necessary.  You can wipe the excess off the card back into the paint container (if your paint is in a jar).
• Peel the screen slowly and carefully from the clay.  Don’t rip it off or you may leave bits of your screen behind.
• Make sure you have a bowl of slightly warm water to drop your silk screen and credit card into as soon as possible to prevent paint drying onto the screen.
• Lightly rub the screen in the water to remove the paint but don’t try to get every last bit off.  Some staining of your screen is OK.  You just don’t want the mesh clogged with paint.  Give it a rinse under clear running water and leave to dry flat on an absorbent surface like paper towel.
• Leave the design to dry before cutting your clay to the desired shape.
• Bake as per instructions for the clay you are using.
• It is a good idea to seal screen printed clay.  Some acrylic paints (like Jacquard Lumiere and Neopaque paints) are heat set and don’t need sealing.  Seal with the sealant of your choice that is suitable for use on polymer clay.

Design Ideas for using a Moiko Silk Screen:

• Screen print over a skinner blend (graduated blended colours) on polymer clay.
• Enhance the design with very thin pigment pens over the screen printed and baked clay.  eg add lines, dots or other marks.
• Use one or more ink colours.  Just put different colours in the line across the top of the screen.
• Try a black on white or white on black colour scheme for dramatic results.
• Screen print black paint on white clay and then colour in with alcohol inks or Chameleon Pens, cut to shape and bake.
• Screen print black on white, cut to shape, bake and then colour with coloured pencils, pigment or alcohol pens.
• Use chalks and pastels or mica powders instead of paint.
• Screen print a design onto clay and when dry, layer a different design over it using a different coloured paint.
• Screen print over foil or leafing.
• Make a number of screen prints using different colour schemes onto clay rolled on a thinner setting and assemble these in a patchwork or stripe design on another layer of clay