Cutter Sets from the Versatile range! Designed by the 2wards Polymer Clay team and manufactured by the Clay Lady Down Under, using PLA plus (+) Filament.
PLA+ Filament Features:
- 100% bio-degradable,
- FDA food safety approved, and
- 10 times stronger than regular PLA Filament.
Tips for getting best results with cutters:
- Place clay on a tile or piece of glass. This helps the cut shapes to adhere to the surface instead of lifting with, and getting stuck in the cutter.
- Press evenly from the top with flat palm of your hand or the best way is to use a piece of acrylic to press the cutter down, thereby preventing the cutter from entering the clay unevenly and getting damaged.
- Another option is to dip cutters in cornflour, water or little Cernit Magic Mix. This method works as a release to prevent the clay from sticking in the cutters.
- Keep cutters clean by wiping with a piece of cloth moistened with a little Isopropyl alcohol or a wet wipe.
Cutters are a generous 12mm deep with a 5.5mm lip or edge on the non-cutting side.
Largest outer dimensions of each cutter in this set are as follows:
H 42 x W 35 mm
H 36 x W 30 mm
H 32 x W 22 mm
H 21 x W 12 mm
H 18 x W 12 mm
H 20 x W 8 mm