Cernit Kit Finish Glass – 2 part Epoxy Resin features:
- Achieve thick, perfectly level layers without bubbles.
- Add progressive layers between drying to get 3D effects.
- May be coloured with solvent-based colors (eg. Darwi Glass Paints) or Alcohol Inks.
- Drying time is 12 to 24 hours (depending on the humidity and temperature).
- VEGAN friendly Resin
- You can bake the project again (once) if you wish to add more components after the resin has hardened completely. Yes, you can!
Kit contents:
- 1 bottle of component A (Epoxy Resin) x 120ml.
- 1 bottle of component B (Hardener) x 60 ml .
- 1 small measuring cup
- 2 plastic gloves
- 1 small wooden mixing stick
- Instructions
How to Use:
Watch the video below and get hints and tips on making resin application easy, safe and with a perfect finish.
Use gloves and a mask that will filter chemical vapors! Measure 2 parts of A (Epoxy Resin) and add one part of B (Hardener) by volume, not weight and mix for 2 minutes. It is important that the two are well mixed. If you wish to colour your resin, add solvent-based Darwi Glass Paints or alcohol ink.
Apply either by brush (clean brushes with a solvent), or directly from the container in which the mixture was mixed, using the mixing stick or a spatula.
If bubbles appear, do not worry! They will disappear after a few minutes. If they don’t, wave a flame across the surface and they will pop.
It is possible to add layers progressively after the drying of each layer, to suspend layers of colour, inclusions or to create a 3D effect.
Drying will take 12 to 48 hours depending on the humidity of the room and the thickness of the resin layer.
Clean equipment with a solvent based cleaner eg Acetone.
Tips:
- Once mixed, the mixture cannot be stored. After 20 minutes, the mixture begins to thicken. Small amounts of unused mixture, may be frozen for a few days (before it sets) and then reused. Once unfrozen it cannot be refrozen as it is no longer viable.
- It is crucial to cover pieces while drying to prevent dust from getting on the surface. Dust will leave flaws on the surface!
- Resin may be sanded with fine grit sandpaper and buffed to a high shine. The edges can be sanded once dry.
- No baking is necessary but you can bake the project if you wish to add more components after the resin has hardened completely.
- Use a non porous stirring stick to prevent bubbles.
- Measure by volume, not weight.
- 4-5mm thick is the maximum thickness for each layer. It is better to do multi layers ( if you require a thicker pour).
Video:
Watch Ana Belchi’s excellent video on using Cernit Finish Glass resin. It is in Spanish with English subtitles and well worth watching how easy this product is to use and get great results first time.







Reviews
There are no reviews yet.